Model 802 Deep Water Submersible Tiltmeter Series

Model 802 Deep Water Submersible Tiltmeter Series
Model 802 Deep Water Submersible Tiltmeter Series - Image 2

Model 802 Deep Water Submersible Tiltmeter Series

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector.

SKU: M802 Category:

The Model 802 DeepWater Series is the fully submersible cousin of our Model 801 Tuff Tilt Series. Performance features are the same, but the DeepWater housing is machined from a solid piece of 316 stainless steel and incorporates a high-pressure neoprene connector.

The pressure rating is 250 bars (2500 meters depth). Higher-pressure versions may be special ordered. Temperature rating is governed by the neoprene connector. Wider temperature range is available with other connector types.

Units are available in a variety of configurations including single axis (uniaxial), or dual-axis (biaxial), analog, digital, or 4-20mA outputs.

Weight

4.98 kilograms
Dimensions

119.38 x 79.76 x 60.96 mm
Applications

Industrial Measurement & Control, Platform Leveling, Structural Monitoring
Angular Range

±0.5, ±3.0, ±50
Resolution

<0.0001, 0.0006, 0.01°
Repeatability

<0.0002, 0.001, 0.02°
Non-linearity (%)

<2, 1, Full span: 2%, ½ span: 1
Scale Factor

0.1, 0.6, 10°
Time Constant (seconds)

0.15, 1.75 sec (2-pole Butterworth low-pass filter)
Kz Coefficient (°/C, typical)

±0.0002
Ks Coefficient (%/C, typical)

<0.02
Output (VDC)

Differential: ±10, Single-ended: ±5
Channels

Temperature, Tilt
Output Impedance (Ω)

270
Temperature Output

0.1°C/mV typical (single ended; 0°C = 0mV)
Power

250mV ripple max, 8-18 Vdc @ 8mA, Reverse polarity protected
Environmental

-30 to +100° C storage, -4 to +60° C operation, IP68
Materials

(6AL-4V Titanium also available), 316SS
Cable

6-conductor, Order cable separately, Two-types available: 1) Neoprene, 20 AWG, no shield 2) PVC jacketed, polypropylene-insulation, 24 AWG, shielded

Related products

Shopping Cart